Click on any sheeting image in the guide to go directly to that product on our store.

Latex thickness guide

How do you know what gauge of latex sheeting to buy, or what gauge will work for a specific garment?  That’s a question that, as a sheeting supplier and manufacturer of latex goods, we deal with daily.  With that in mind, we decided to compile an index of latex sheeting gauges and how they’re typically used.  This is just a rough guideline, not a fixed rule, but hopefully it will dispel some common misconceptions.  

Please note that thicker DOES NOT always mean more durable.  In some cases it can mean just the opposite.  Thick latex, when used for the wrong application can be overstretched, and can cause seams to burst.  It’s also worth noting that thinner sheeting (0.20mm-0.50mm) that’s glued to very thick sheeting (1.0mm and higher) is very susceptible to tears at the seams.  The reason being the difference in stretch between the thin and thick sheeting will put undue stress on the thinner stuff.  We will be writing a post about this in the near future.

Before we begin - a clarification: For this guide we are talking about “form-fitting” garments as well as garments that “shape” the body.  The distinction is as follows: form fitting garments, like a pair of leggings, sit flush against the skin.  Garments that “shape” the body are closer to control-top pantyhose or a push-up bra.  They may sit flush against the body, but they are typically a little more constrictive to tuck in a push up unsightly areas (or give you that nice “tight latex” feeling). 


Very thin latex - 0.20mm or less

This gauge is great for draping or flowing garments.  Capes, cowls, circle skirts all work really well in thin gauges.  It’s the toughest latex to work with as it curls quite severely when thinner and glue are applied and can puncture easily.  Seams made out of 0.20mm latex are incredibly stretchy.  This is not a good gauge for items that you want to sculpt/shape the body and if the garment is too small it will not stay in place (i.e. a tank top that’s too small will roll up instead of covering your stomach).


Thin latex - 0.33mm

This is typically the thinnest gage we would suggest for a form-fitting garment.  It’s got a great strength to durability ratio but will not shape the body as well as 0.45mm latex.  While it will work for form fitting garments, it’s also got a nice flare and drape, making it very versatile.  Transparent sheeting (either natural or colored) are usually sold in this thickness as it is more transparent than thicker sheeting.  Because it’s easier to work with than 0.20mm latex, it’s ideal for ruffles, or anything that requires both sides of the sheeting to be glued (i.e. glue front and back). 


Standard latex - 0.40mm-0.50mm

This is what we recommend to beginners.  It’s a good all-around thickness.  Easy to work with, while still being thin enough to conform comfortably to the body.  This is also the gauge that we most recommend for shaping the body.  It’s still quite comfortable, so it’s got some give (give will also mean durability because you won’t be busting out of the seams).  Not great for flared items or anything that has to “flow” this gauge is best used for the skin-tight look.  Contrary to popular belief, you don’t need to go much thicker than this if you want a durable (but still comfortable) outfit.


Thick latex - 0.65mm-0.85mm

At this thickness, it becomes harder to make a form-fitting garment.  Because there is less stretch in the latex, there will be less stretch in the garment… so if it’s too tight on someone, the seam can burst or the garment will be uncomfortable.  If you’re getting something made from this gauge, your best bet is to either get it made to measure (if form fitting) or something a little lose (jeans, kilts, jackets).  This is also a great gauge for bondage items like vacbeds, arm binders, straightjackets and muzzles.


Very thick latex - 1.0mm and higher

There is much less stretch in these thicker gages, so it’s unsuitable for form-fitting garments.  As with the 0.65mm-0.85mm latex, too much stress on the seams will cause them to burst, so anything form fitting, should you go that route, must be carefully sized.  This is corset-grade latex, so it’s best used for items that need little flexibility - jackets, corsets, belts, bondage items and other structural items.  Note that while some think this is the most durable latex, it’s very low stretch, meaning it will not work for improperly sized items!  

The fact that "thicker=better" is a very common misconception. It is most important that the right gage is used for the right purpose.

---

Questions, comments, concerns?  Email us at info@sheetlatex.com

Copyright © 2011 www.sheetlatex.com and Elastica Engineering Inc.